VIP member
DIN rail mounted single-phase electronic energy meter LEM011XX
The LEM011 series DIN rail mounted single-phase electronic energy meter is a series of single-phase two-wire active energy meters developed by our com
Product details
Functional Features
35mm DIN standard rail installation, in compliance with DIN EN 50022 standard, or front panel installation (installation hole center distance of 63mm and 67mm), two installation methods can be chosen by the user at will.
6-pole width (module 12.5mm), in accordance with JB/T7121-1993 standard.
5+1-bit (99999.1kWh) stepper motor pulse counter display or 6+1-bit (999999.1kWh) LCD display can be selected.
Two 6-digit LCD counters can be selected to display the total battery level (5+1 display) and real-time battery level (4+2 display), and the real-time battery level can be reset through a red button on the panel. The red button used for reset operation can be sealed with lead for protection, suitable for use in rental housing.
Optional built-in load switch for remote cost control.
The built-in far-infrared data communication port and RS485 data communication port can be selected, and the communication protocol complies with DL/T645-1997 standard. Other communication protocols can also be selected.
The configuration has a polarized passive power pulse output port that complies with IEC 62053-31 and DIN 43864 standards.
Two LEDs respectively indicate the power status (green) and the power pulse signal (red).
Unidirectional measurement of single-phase two-wire active energy consumption, independent of the direction of load current flow, in accordance with IEC 62053-21 standard.
Directly connected for use, with two wiring options available: S-shaped and T-shaped.
The transparent PC material molded short terminal cover is beneficial for reducing installation space and facilitating centralized installation.
6-pole width (module 12.5mm), in accordance with JB/T7121-1993 standard.
5+1-bit (99999.1kWh) stepper motor pulse counter display or 6+1-bit (999999.1kWh) LCD display can be selected.
Two 6-digit LCD counters can be selected to display the total battery level (5+1 display) and real-time battery level (4+2 display), and the real-time battery level can be reset through a red button on the panel. The red button used for reset operation can be sealed with lead for protection, suitable for use in rental housing.
Optional built-in load switch for remote cost control.
The built-in far-infrared data communication port and RS485 data communication port can be selected, and the communication protocol complies with DL/T645-1997 standard. Other communication protocols can also be selected.
The configuration has a polarized passive power pulse output port that complies with IEC 62053-31 and DIN 43864 standards.
Two LEDs respectively indicate the power status (green) and the power pulse signal (red).
Unidirectional measurement of single-phase two-wire active energy consumption, independent of the direction of load current flow, in accordance with IEC 62053-21 standard.
Directly connected for use, with two wiring options available: S-shaped and T-shaped.
The transparent PC material molded short terminal cover is beneficial for reducing installation space and facilitating centralized installation.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-