DType entrance and exit control machine, is a parking management system entrance and exit control machine for users to read cards and enter and exit the parking lot.
appearance:The approximate width of a rectangular cabinet is only11Centimeters,LEDThe LCD display panel is seamlessly attached to the cabinet, with a sleek and minimalist overall design.
Application:Mainly used in the monthly card management system
Function:
1User self-service card reading and entry/exit, achieving unmanned operation;
2Connect with other devices and install them on the safety island on one side of the parking lot entrance or exit passage to control and coordinate the workflow between the entrance or exit devices;
3Provide voice prompts and intercom functions.
Advantages:
1Can connect to other devices, such as Bluetooth card readers;
2The appearance is simple and beautiful, adopting1.5mmThe cold pressing plate has a high level of protection;
3Simple, practical, and affordable.






Technical parameters:
1. Card reading configuration: Mifarel IC module or EM ID module.
2. Other configurations: voice prompts, intercom.
3. Display: 64x16 dot matrix high brightness LED display.
4. Controller: 20MHz industrial microprocessor, 1Mbit NVRAM memory, hardware watchdog, 2KV optoelectronic isolation CAN interface.
5. Cabinet: 1.5mm cold-rolled plate, electrostatic spraying, IP54 protection level.
6. Working environment temperature:- 40℃~55℃
7. Working humidity: 10%~95% without condensation
8. Execution standard: GA/T761-2008 Technical Requirements for Safety Management System of Parking Garage (Yard)