As a rotary adsorption dehumidifier, its most important core componentdo-Continuously rotating honeycomb shaped silicone gelRotating wheel, made of special ultra efficient moisture absorbing medium material40Synthesized through multiple processing techniques. A wheel is a special honeycomb structure with equidistant, parallel, and uniform air channels. In this way, the impeller not only has a huge surface area in contact with air, but also improves its moisture absorption efficiency.
Rotating wheel inside the dehumidifierDivide the surface into270Dehumidification of degreeProcessing areas and90The degree ofRegeneration area, dehumidification wheel8~10change/Slowly rotate at an hourly rate to ensure that the entire dehumidification process is continuous.
When the air passes through the processing area of the impeller, the water vapor is adsorbed by the moisture absorbing medium in the impeller, and the water vapor undergoes a phase change to liquid water, releasing latent heat; At this point, the air becomes dry due to a decrease in its own moisture content; Afterwards, the processed air is sent out by the processing fan and becomes dry and hot air.
At the same time, in the regeneration area, the other air passes through the regeneration heater and becomes high-temperature air (usually100~140The regenerated air passes through the moisture absorbing wheel, causing the adsorbed water in the wheel to evaporate, and the regenerated air becomes humid air due to the evaporation of water, while the temperature decreases; Afterwards, the humid air is discharged outdoors through a regeneration fan.

Regenerated air (usually taken from outdoors or computer rooms) is heated until it reaches100-130After reaching ℃, blow it back into the regeneration zone. The adsorbed water in the silicone gel is desorbed into water vapor, which is discharged by the fan along with the regenerated air, thus completing the transfer of water from inside the system to outside the system. After the regeneration of the wheel, its moisture absorption ability was restored and it was transferred to the dehumidification sector for re dehumidification.

The above-mentioned dehumidification and regeneration processes occur simultaneously and repeat themselves, ensuring the continuous and stable operation of the dehumidifier.

Structural characteristics：

Specialized aluminum alloy frame

Adopting a dedicated aluminum alloy frame, its structure is tight and has good sealing performance. Adopting double-layer insulation, the outer surface is sprayed with plastic, the inner surface is made of galvanized steel plate, and the middle is made of polyurethane material, with the symbol of national standard heat transfer rate and anti cold bridge, effectively preventingThe phenomenon of condensation.

Advanced wheel technology

Core technical components-Moisture absorbing wheel, using the fifth generation of European technology-Efficient titanium silicon composite wheel. Its adhesive rate reaches82%The above is widely used for various dehumidification requirements.

Wheel drive and sealing system

Imported brand drive motors and synchronous belts, combined with unique self tensioning, anti lock bearings, and contact sealing systems, effectively ensure the stable and reliable operation of the wheel.

Reliable and flexible electrical control

All imported electrical components are used, with reliable fault alarm and protection measures, and a remote communication interface that can be accessed throughDDCperhapsPLCRealize fully automatic control and can be configured with a touch screen or configuration software to meet industrial automation requirements.

Safe and diverse regenerative heating system

Regeneration can be achieved through various methods such as electric heating tubes, steam heating, thermal oil coils, direct combustion of fuel, and direct combustion of natural gas. The inlet is equipped with a high-temperature resistant aluminum filter, which has a long service life and is easy to maintain.

Precision sheet metal processing

We use high-quality steel plates from large factories, powerful imported CNC cutting, bending, punching, and precision machining centers, and rich surface treatment processes such as galvanizing, spraying, and baking paint to meet customers' different requirements for appearance.

Product Overview:

KZBThe series isIThe standard rotary dehumidifier unit developed and produced by the company has all the functions of dehumidification and ventilation, and is suitable for most occasions with special humidity requirements.

KZBThe series isOur companyThe basic models of dehumidification have been derived from this foundationHDZWaiting series; Simplify itHDM、HDXVarious forms and specifications of units such as series.

Scope of use:

1500～50000m³/hHandle air volume.

Widely applicable to places and workshops with various humidity requirements.

Standard rotary dehumidifierStructural form:

KZBThe standard type is divided into conventional typesverticalType andConventional horizontalThere are two types.

conventionstandardtypeRotary dehumidifier Main components of dehumidifier

◆ Complete specifications, maximum air volume up to50000m³/h◆Imported ultra efficient silicone dehumidifier wheel

◆ Built in processing fan, low noise, reasonable airflow combination ◆Imported rotary motor, belt and drive system

◆ Full frame structure, high strength, good anti-corrosion and anti cold bridge effect ◆Imported Wheel Sealing System

◆ Convenient to add other functional segments to meet various air treatment requirements ◆Graded regenerative electric (steam) heater

◆ Directly connected external processing fan, high pressure head, multiple air outlet directions ◆Handling fans, motors, andEU4Standard filter

The regeneration system is placed at the top of the dehumidification section to save space ◆Main electricalThe components are sourced from top international brands

The whole machine has a compact structure and is easy to install and maintain ◆Double layer insulation board and high-strength, low leakage frame structure

ZHONGYOUStandard rotary dehumidifierControl method:

◆ Emergency stop protection ◆ Automatic humidity control

◆ Motor startup, operation, and fault display ◆ Humidity exceeding limit alarm

◆ Heater start stop, operation, and fault display ◆ Filter blockage alarm

approveAccording to customer requirements, standard electrical control can be selected, or other control methods can be chosen

Standard electrical control Optional electrical control

◆ Manual automatic operation switching ◆ Remote control

◆ Wheel stop and overheating shutdown protection ◆ Human machine interface

◆ Fan shutdown alarm protection ◆ Fan frequency conversion control

◆ Reserved interface, expandable function ◆ Temperature display

ZHONGYOUTechnical parameters of standard rotary dehumidifier

Note:The data in the table is rated data, based on the air condition20℃, density1.2kg/m³.

◇ Steam consumption according to2108.4kJ/kg,gauge pressure400kpacalculation.

The above units are all selected200mmthicknessHPSSilicone wheel, please call our company to explain other thickness requirements.

The power supply for the dehumidifier is3V～50Hz 380V.