type number:HYXD-1200FC

ruler Inches: External dimensions(W*D*H)：1200*550*1980mm

inner dimensions(W*D*H)：1176*530*1700mm

Technical Specifications:

electricity Pressure:AC220V±10% 50Hz

merit Rate: Peak700W mean:80W左右

controller;LCD control panel

humidityadjustableScope:10%RH-20%RH；

Display accuracy:±0.1%RH

Cabinet material: cold-rolled steel plate, surface electrostatic spraying;

Door style:fourOpen the door，Internal configuration4-layer adjustable laminated board with a load-bearing capacity of 30KG，

Wheels:two groupsBelt brakecarcaster；

Dehumidification system：high-efficiency filtrationDehumidification module

Cabinet structure:

1. Cabinet door: Made of high-quality cold-rolled steel plate, in compliance with mechanical process standards, ensuring the cabinet is sturdy. The cabinet door has a permanent magnet sealing strip to ensure the airtightness inside the cabinet;

2Inside the cabinet: equipped with high-precision humidity sensing probes;

3Cabinet material: High qualitysheet metal；

4CabinetTop surface of the body: Settinghigh-efficiency filtrationDehumidification module;

5Front door panel: Install humidity controller,LCD control panel；

6、Internal configuration4-layer adjustable laminated board with a load-bearing capacity of 30KG

1、 The importance of chip moisture-proof cabinet

Chips are highly sensitive electronic devices that are easily affected by environmental humidity. Excessive humidity can cause oxidation of the metal parts on the surface of the chip, leading to short circuits or corrosion of the circuit, ultimately affecting the performance and lifespan of the chip. Especially in humid environments, this risk increases exponentially. Therefore, using a chip moisture-proof cabinet to control the humidity of the storage environment is crucial for ensuring the quality of the chips.

2、 Working principle of chip moisture-proof cabinet

The chip moisture-proof cabinet adopts advanced dehumidification technology, which adjusts the humidity inside the cabinet through internal desiccants or electronic dehumidification systems. Desiccants are usually moisture absorbing materials such as molecular sieves, which can effectively absorb moisture from the air; The electronic dehumidification system condenses water vapor in the air through the principle of refrigeration, thereby reducing humidity. Regardless of the method used, it can ensure that the cabinet is maintained in a constant and suitable low humidity environment.

3、 How to use chip moisture-proof cabinet correctly

1. Choose the appropriate humidity level: Set the appropriate humidity level based on the specific type of chip and its sensitivity to humidity. In general, the humidity inside the chip moisture-proof cabinet should be controlled below 30%.

2. Avoid frequent opening and closing of doors: Frequent opening and closing of doors can disrupt the humidity balance inside the cabinet. It is recommended to minimize unnecessary opening times and quickly complete the process when picking up and placing items.

3. Regular inspection and maintenance: Regularly check the working status of the moisture-proof cabinet and the effectiveness of the desiccant to ensure the normal operation of the dehumidification system. If the desiccant is found to be ineffective, it should be replaced in a timely manner.

4. Reasonable placement of chips: When placing chips, attention should be paid not to be too dense to facilitate air circulation and avoid excessive local humidity.