VIP member
Charging pile mechanical static load testing machine
The mechanical static load test device is used to test the mechanical static load capacity of electric vehicle power supply equipment, AC/DC piles, lo
Product details
1、 Equipment Overview:
The mechanical static load test device is used to test the mechanical static load capacity of electric vehicle power supply equipment, AC/DC charging piles, low-voltage metering boxes, and other products. This test device includes a cabinet, a frame, and a placement platform. The placement platform is equipped with force components for loading the measured metering box; The force application component includes an X-axis moving component, a Y-axis moving component, and a loading cylinder; The mechanical static load testing device includes a torque loading component set at the top of the frame, which includes a torque motor, a lifting shaft, a cross frame, and vertical arms at both ends of the cross frame. The device has the advantages of accurate loading force, simple operation, and efficiency.
2、 Compliant with standards：
The mechanical static load test device for electric vehicle power supply equipment, the mechanical static load test device for AC/DC charging piles, and the mechanical static load test device for low-voltage metering boxes shall meet the following regulations and standard test requirements in terms of their functions, performance indicators, and other technical indicators:
1. Q/GDW 11008-2013 Technical Specification for Low Voltage Metering Box;
2. GB 7251.1-2013 Low voltage switchgear and control gear - Part 1: General principles;
3. GB 7251.5-2008 Low voltage switchgear and control equipment - Part 5: Special requirements for power distribution equipment in public power grids - Test requirements in clauses 8.2.101.1.1 and 8.2.101.1.3 of the standard;
4. GB 10963.1-2005 Electrical Accessories - Circuit Breakers for Overcurrent Protection in Household and Similar Places - Part 1: Circuit Breakers for AC Use;
5. GB 14048.2-2008 Low voltage switchgear and control equipment Part 2: Circuit breakers;
6. GB 14048.3-2008 Low voltage switchgear and control equipment Part 3: Switches, isolators, isolating switches and fuse assemblies;
7. Q/GDW 1355 Type Specification for Single phase Intelligent Energy Meters;
8. Q/GDW 1356 Three phase Intelligent Energy Meter Type Specification;
9. GB/T39752-2021 Safety Requirements and Test Specifications for Electric Vehicle Power Supply Equipment;
3、 Main technical parameters：
1) This device is capable of conducting mechanical static load tests, measuring box shell stiffness tests, side wall static load tests, and torque resistance tests on electric vehicle power supply equipment (charging piles);
2) Equipment Technical Parameters：
Test force accuracy: ± 2%
Testing station: Testing station for electric vehicle power supply equipment, single-phase and three-phase single meter metering boxes for AC/DC charging piles (testing stations can be customized according to user needs);
◆ Safety device: equipped with an emergency stop protection system;
3) Technical parameters for mechanical static load test of electric vehicle power supply equipment：
Control unit: PLC program intelligent control, touch screen operation;
Applied force: 8500N/m2; Application position: Top of electric vehicle power supply equipment;
Duration: 5 minutes, time can be set;
Applied force: 1200N; Application position: electric vehicle power supply equipment and top front and back, as well as top corner;
Duration: 5 minutes, time can be set;
Testing station: 1. Charging mode; 2. Charging mode; 3. Charging mode; 4. Electric vehicle power supply equipment;
4) Technical parameters for side wall static load test：
Control unit: PLC program intelligent control, touch screen operation;
Applied force: 60N; Application position: side of the measuring box;
Duration: 5 minutes, time can be set;
◆ Testing station: Compatible with single-phase single meter position measuring box and three-phase single meter position measuring box;
5) Technical parameters for torque resistance test：
Control unit: PLC program intelligent control, touch screen operation;
Apply force: 2x1000N; Application method: The installation hole of the measuring box is fixed on the equipment base, and the horizontal rotating frame is tightly attached to it;
◆ Application position: Horizontal rotating frame at both ends;
◆ Testing station: Compatible with single-phase single meter position measuring box and three-phase single meter position measuring box;
6) Equipment force range：
Static load pressure: 8500N/m2 uniformly distributed load;
Static pressure holding time: can be set according to standard regulations;
◆ Application of force on the shell: sample reversal clamping is achieved;
◆ Adjustment of the distance of force applied to the shell: manual, slide rail locking;
◆ Torque range: 1000N on each diagonal - applying a force of 2 x 1000N;
◆ Torque time: can be set according to standard regulations;
Force accuracy: transmitted through two sets of S-shaped sensors, with an accuracy of ± 2%;
7) Equipment power supply: AC220V，50HZ；
The mechanical static load test device is used to test the mechanical static load capacity of electric vehicle power supply equipment, AC/DC charging piles, low-voltage metering boxes, and other products. This test device includes a cabinet, a frame, and a placement platform. The placement platform is equipped with force components for loading the measured metering box; The force application component includes an X-axis moving component, a Y-axis moving component, and a loading cylinder; The mechanical static load testing device includes a torque loading component set at the top of the frame, which includes a torque motor, a lifting shaft, a cross frame, and vertical arms at both ends of the cross frame. The device has the advantages of accurate loading force, simple operation, and efficiency.
2、 Compliant with standards：
The mechanical static load test device for electric vehicle power supply equipment, the mechanical static load test device for AC/DC charging piles, and the mechanical static load test device for low-voltage metering boxes shall meet the following regulations and standard test requirements in terms of their functions, performance indicators, and other technical indicators:
1. Q/GDW 11008-2013 Technical Specification for Low Voltage Metering Box;
2. GB 7251.1-2013 Low voltage switchgear and control gear - Part 1: General principles;
3. GB 7251.5-2008 Low voltage switchgear and control equipment - Part 5: Special requirements for power distribution equipment in public power grids - Test requirements in clauses 8.2.101.1.1 and 8.2.101.1.3 of the standard;
4. GB 10963.1-2005 Electrical Accessories - Circuit Breakers for Overcurrent Protection in Household and Similar Places - Part 1: Circuit Breakers for AC Use;
5. GB 14048.2-2008 Low voltage switchgear and control equipment Part 2: Circuit breakers;
6. GB 14048.3-2008 Low voltage switchgear and control equipment Part 3: Switches, isolators, isolating switches and fuse assemblies;
7. Q/GDW 1355 Type Specification for Single phase Intelligent Energy Meters;
8. Q/GDW 1356 Three phase Intelligent Energy Meter Type Specification;
9. GB/T39752-2021 Safety Requirements and Test Specifications for Electric Vehicle Power Supply Equipment;
3、 Main technical parameters：
1) This device is capable of conducting mechanical static load tests, measuring box shell stiffness tests, side wall static load tests, and torque resistance tests on electric vehicle power supply equipment (charging piles);
2) Equipment Technical Parameters：
Test force accuracy: ± 2%
Testing station: Testing station for electric vehicle power supply equipment, single-phase and three-phase single meter metering boxes for AC/DC charging piles (testing stations can be customized according to user needs);
◆ Safety device: equipped with an emergency stop protection system;
3) Technical parameters for mechanical static load test of electric vehicle power supply equipment：
Control unit: PLC program intelligent control, touch screen operation;
Applied force: 8500N/m2; Application position: Top of electric vehicle power supply equipment;
Duration: 5 minutes, time can be set;
Applied force: 1200N; Application position: electric vehicle power supply equipment and top front and back, as well as top corner;
Duration: 5 minutes, time can be set;
Testing station: 1. Charging mode; 2. Charging mode; 3. Charging mode; 4. Electric vehicle power supply equipment;
4) Technical parameters for side wall static load test：
Control unit: PLC program intelligent control, touch screen operation;
Applied force: 60N; Application position: side of the measuring box;
Duration: 5 minutes, time can be set;
◆ Testing station: Compatible with single-phase single meter position measuring box and three-phase single meter position measuring box;
5) Technical parameters for torque resistance test：
Control unit: PLC program intelligent control, touch screen operation;
Apply force: 2x1000N; Application method: The installation hole of the measuring box is fixed on the equipment base, and the horizontal rotating frame is tightly attached to it;
◆ Application position: Horizontal rotating frame at both ends;
◆ Testing station: Compatible with single-phase single meter position measuring box and three-phase single meter position measuring box;
6) Equipment force range：
Static load pressure: 8500N/m2 uniformly distributed load;
Static pressure holding time: can be set according to standard regulations;
◆ Application of force on the shell: sample reversal clamping is achieved;
◆ Adjustment of the distance of force applied to the shell: manual, slide rail locking;
◆ Torque range: 1000N on each diagonal - applying a force of 2 x 1000N;
◆ Torque time: can be set according to standard regulations;
Force accuracy: transmitted through two sets of S-shaped sensors, with an accuracy of ± 2%;
7) Equipment power supply: AC220V，50HZ；
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-