Microwave ceramicspowderDrying equipment is mainly used for honeycomb ceramics, process ceramics, high-voltage insulation ceramics, and special ceramicsPowder, electronic material powderDrying and shaping, etc.
Conventional heating methods such as flame, hot air, electric heating, steam drying, etc. all utilize the principle of heat conduction to transfer heat from the outside to the inside of the object being heated, gradually increasing the temperature at the center of the object, which is called external heating. It takes some time to reach the desired temperature in the central area, and objects with poor thermal conductivity require even longer time. These traditional drying methods have long drying times, high power consumption, uneven heating, flipping up and down, and high labor intensity. However, microwave drying can effectively avoid this situation. Microwaves can penetrate the inside and outside of objects and heat them simultaneously, with a frequency of 2450MHz. With 2.45 billion oscillations per second, molecules rub against each other to generate heatMutual absorption of waves between body and matterFever.

Microwave ceramicspowderThe advantages of drying and shaping equipment include:
1. The quality of product drying and shaping is good, without cracking.
2. Easy to control, convenient and flexible to operate.
3. Save time and achieve high output.
4. Low energy consumption.
5. Low production intensity and minimal land occupation.
6. Effort saving, process saving, especially easy to connect with the front and rear processes in an automatic line, reducing the number of handling times.
7. Environmentally friendly, clean and hygienic. No pollution, and there will be no "three wastes" problem.

Tunnel style microwave dryingEquipment technical parameters:
Power input: three-phase 380V ± 10%, 50Hz
Microwave frequency: 2450MHz ± 50MHz

Microwave visual load power: 28kw
Output power: 20KW (adjustable)
External dimensions:8800mm×820mm×1750mm
Microwave leakage: meets national standard ≤ 5 MW/cm2
Working environment: 5~40℃Relative temperature ≤ 80
There are no corrosive gases, conductive dust, or explosive gases around
Can be customized according to customer needs.There are already domestic ones nowShaanxiHuaxing Electronics,AnhuiKaichuang Electronics,ShenzhenAmperex Electronics uses this device.