Carbolite RWF rapid heating box furnace

1、 Product Introduction:

Carbolite RWF fast heating muffle furnace offers three specifications, with a maximum working temperature of 1100 ° C and 1200 ° C. The design combines full radiation resistance wire and low heat storage insulation material, which can achieve rapid heating in the furnace.

2、 Standard parameters:

1. Maximum operating temperature of 1100 ° C and 1200 ° C

2. Furnace cavity volumes of 5, 13, and 23L

3. Heating up to 1000 ℃ only takes 10 minutes

4. Full radiation resistance wire, providing high energy efficiency and ensuring rapid heating

5. Low energy consumption lightweight insulation material ensures high energy efficiency and rapid heating

6. Vertical damping upper door to ensure that the hot furnace door is kept away from the operator

7. PID301 standard controller, single segment program control

8. Open the door with damping to ensure that the hot furnace door is kept away from the operator

9. Dust free and wear-resistant furnace bed

3、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Over temperature protection (recommended for protecting valuable samples or unattended operations)

4、 Technical parameters:

5、 Attention:

1. The heating rate is measured under no-load operation with the temperature set at 100 ° C below the maximum temperature

2. The insulation power is measured under continuous working conditions

3. The maximum power and heating time are both based on a 240V power supply

4. The volume of the uniform temperature zone is less than the total volume of the oven