Carbolite HTRV-A 1700 ° C Open close Tube Furnace

1、 Product Introduction:

Kabolette HTRV-A open and close tubular, with a maximum temperature of 1700 ° C.

The installation and positioning of the working pipes in the open closed tube furnace are simple and convenient, and even reactors with flanges can be easily inserted. The open close design can also quickly cool the sample. There is a control thermocouple installed in the middle of the heating zone on the stove. The heat dissipation holes on the furnace shell are designed to cool the furnace body by convection. The two parts of the furnace body each have insulation materials and molybdenum disilicide heating elements, which are installed vertically in the furnace body. The safety lock can protect the operator, and when the furnace body is opened, the heating power supply is cut off.

The standard vertical tube furnace does not include brackets, and users can integrate the furnace into their own equipment. An additional L-shaped bracket can also be selected to support the furnace body.

2、 Application example:

Annealing, pyrolysis, sublimation, synthesis, tempering, drying, rapid prototyping, crystal growth, quenching, sintering, carbonization, degassing, degreasing, metal injection molding (MIM)

3、 Standard parameters:

1. Maximum operating temperature of 1600 ° C and 1700 ° C

2. Programmable EPC3016P1 Controller

3. Over temperature protection

4. Vertical use

5. The maximum outer diameter of the working pipe under controllable atmosphere environment is 100mm

6. Heating length: 120, 250, 500 or 700mm

7. High quality B-type thermocouple

8. Ceramic fiber insulation material with low heat storage capacity

9. High quality molybdenum disilicide heating element, vertically suspended installation

10. An independent control cabinet with 3-meter cables, plugs, and sockets between it and the furnace body

11. Ethernet communication interface

4、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Work pipes of various sizes and materials

3. Thermal insulation plugs and radiation shielding plugs prevent heat loss and improve temperature uniformity

4. More information on controllable atmosphere and vacuum components

5. Vacuum components can be selected from mechanical pumps or turbo molecular pumps

6. Longer heating length

7. L-shaped bracket, easy to use

8. Oxygen probe for inert gas supply system

9. The cable between the furnace body and the control cabinet is 6m long

5、 Technical parameters:

6、 Attention:

1. Closed status

2. When using ceramic working tubes, the heating rate should not exceed 5 ℃/minute.

3. 220-240V is a single-phase power supply, while 380-415V is a three-phase power supply.

4. The length of the uniform temperature zone of the horizontal tube furnace is measured when it is 100 ℃ below the maximum temperature and shielded plugs are installed at both ends.

5. The maximum continuous use temperature should be 100 ° C lower than the maximum temperature.

6. The depth of the control cabinet needs to reserve a distance of about 150mm for electrical plugs and sockets