AAF 11/18 and AAF 12/18 ashing furnaces produced by Huanao Technology

1、 Product Introduction:

The ashing furnace series produced by Huanao Technology is designed for the best ashing environment, ensuring complete combustion of samples.

For laboratories that require ashing and other heat treatments, AAF 12/18 has all the advantages of the AAF series ashing furnaces, with a maximum temperature of up to 1200 ° C.

2、 Standard parameters:

1. Maximum temperature of 1100 ° C and 1200 ° C

2. PID301 standard controller, single segment program control

3. Two layer sample holder and operating handle, doubling the sample capacity

4. Sample rack and operating handle ensure larger sample capacity

5. Suitable for food, plastics, coal, and other hydrocarbons

6. After preheating, the air is introduced into the furnace

7. The heating element is protected by silicon carbide felt to prevent corrosion from carbon and corrosive gases

8. Heating on both sides

3、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Over temperature protection (recommended for protecting valuable samples or unattended operations)

4、 Technical parameters:

5、 Attention:

1. The insulation power is measured at 500 ° C

2. The heating rate is measured under no-load operation with the temperature set at 100 ° C below the maximum temperature

3. The maximum power and heating time are both based on a 240V power supply