application |
Used for detecting the liquid level of powders, fine particles, and liquid media, especially suitable for silos, funnels, storage tanks, and containers. |
describe |
Compact liquid level switch CapFox ® ENT7 consists of a control unit and a probe. It detects changes in capacitance caused by changes in liquid level and can be equipped with flexible or rod-shaped probes. The rod-shaped probe can be installed in any position. The sensitivity of its detection is adjustable. CapFox ® The output of ENT7 is a passive contact, which will be triggered when the liquid level reaches the limit. This contact can be used to control external devices such as vibration wings or sliding devices, pumps, light or sound alarms (such as alarms or horns), and can also transmit signals to PLCs. The minimum or maximum safety limit mode can be selected according to customer requirements. |
Capacitance Range |
0 – 200 pF |
operation temperature |
Medium:- 20/ +80 ℃ Environment HT:- 20/ +220 ℃ environment 20/ +60 ℃ |
Process pressure |
atmospheric pressure |
Rod shaped probe |
Stainless steel 316Ti, partially PP insulated, probe length 300 mm (minimum 300 mm, maximum 1000 mm) Or fully insulated with PTFE, with a probe length of 300 mm. |
Flexible probe |
Stainless steel 316Ti, fully PP insulated, probe length 3000 mm (minimum 1000 mm, maximum 6000 mm) |
power supply |
AC 230V or DC 24V (optional) |
Input power |
five |
VA |
Switching Output Contact: A passive single pole bidirectional contact |
Contact capacity: AC 250 V, 4A (resistive load) |
Safety limit mode |
Built in selection of high or low liquid level alarm |
casing Impact resistant plastic (ABS) |
W |
x H x D 104 x 65 x 144 mm |
protection grade |
IP65(EN 60529) |
Electrical connection |
2 x cable connectors PG 11 optional Power supply DC 24V |