PSC-K4Cap type deepwater samplerMade of UPVC, with a large injection port for easy flushing. Sampling cylinder * does not contain metal. The closers at the end of the sampler are connected to each other through a sturdy rubber tube. After dropping the hammer from the outer edge of the water surface along the cable, release the end closer and close the water sampler.

When operating a single sampler on a cable, we recommend using an intermediate mounting bracket,
Keep the sampler in a vertical position.

If a series of water collection work needs to be carried out on one cable, each sampling cylinder can be placed under it
Fang An installs another hammer, which will lower when the end closer of the previous water collector is closed
The deviation of the hammer will be released, triggering a series of sampling operations along the cable.

PSC-K4Cap type deepwater samplerCapacity: 1.7L, 2.5L, 5L, 8L, 10L, 20L (optional)

Middle installation bracket

Storage bracket