CZ type steel machine, one click replacement, CZ integrated machine, fully automatic purlin equipment, iron sheet tile machine, Xinyunhui Machinery

Technical parameters of CZ all-in-one machine equipment

model:80/120-300

1、 Raw material: guide shaft+Guiding wheel

Leveling: Upper three, lower four+two channels for feeding, fully solid core modulation heat treatment and polishing electroplating

Main molding: 18 component molding (one of which is waist height molding at 87-95 degrees with 13 sets of CZ exchange modules, which can be switched by rotating 180 degrees)

Compression bar: straight bar with a straight line

Straightening: Ten roller CZ dedicated two axis straightening+four roller two axis straightening, a total of two straightening units

Introduction: Equipped with transmission, driven by upper and lower shaft gears

Punching: After forming, punch a single hole+punch a double hole, and also provide one set of single hole diameter of 14mm and one set of double hole diameter of 26 * 16mm

Cutting: After forming, there is no need to change the blade in the infinite cutting system. Random 80-200 blades are used, and an additional 200-300 blade control system is provided

Main control cabinet: 1 unit

Type Change Method: (Electric) Type Change, (Three Type Change Motors: 0.75 * 3kw)

Replacement distribution box: 1 (installed in the middle of the rack)

External controller: 1 (can easily control forward and backward movement by clicking during production and debugging)

Origin of main accessories: PLC (Omron Japan), touch screen (Xinjie), relay (Omron Japan)

Proximity switch (Korean Autonex), length encoder (Japanese Omron)

Hydraulic system

Hydraulic motor: external five-star piston connecting rod type

Hydraulic station: Hydraulic station power 22KW

Fuel tank capacity 500 liters

Main component origin: Electromagnetic valve Beijing Huade

Material dispenser

Load capacity: 5 tons

Tightening method: Hand cranked

Tighten the center of the four-bar linkage outward

Brake: Double clamping of the main shaft

Material tray

Material length: 2 pieces of 3 meters

Material handling method: The frame is welded with channel steel and angle steel, and rollers are installed on the surface

Performance parameters

Roll: Material: GCr15 bearing steel

Processing technology: CNC machining followed by heat treatment to HRC58-60, precision machining followed by polishing and electroplating

Spindle: Material: 40Cr

Processing technology: after numerical control processing, HRC28-32 is modulated, and then finish turning, polishing and electroplating

Production product parameters

Production product specifications: C width (80-300mm), Z width (120-300mm) can vary freely

Change; The waist height (30-80mm) can be freely adjusted; Small edge (10-20mm); Plate thickness t

(1.5-3.0mm) adjustable

Discharge speed: High speed 25 meters/minute (depending on the number of holes drilled)

Material applicable: Q195, Q235 hot-rolled strip steel or hot-rolled galvanized strip steel (1.5-3.0mm)