The CNC dual axis computer numerical control indexing disc is easy to install and operate. Small size and large processing range. Can be installed on a machine tool with an X-axis travel of about 1 meter. It can be used for synchronous machining with a five axis working mother machine, and can also be used with a four axis working mother machine. The tilt axis is connected to the M-signal with our company's DC/AC single axis servo controller. The CNC cradle style dual axis computer numerical control indexing disc with dual lead worm gear and dual Peilin (Peilin enlarged) design has excellent wear resistance and is suitable for simultaneous machining of five axis tool mother machines. The center height of the disk is low, and the processing range is large. Provide balance cylinder selection accessories, suitable for long-term heavy cutting processing, with excellent durability. The CNC manual CNC manual tilt indexing disc can be used in conjunction with a four axis working mother machine for simultaneous four axis machining. It can also be combined with our company's DC/AC single axis servo controller and connected to M-signal for equal division machining. Suitable for general traditional milling machines, drilling machines, and cutting center machines. Combined with an electrical discharge machining machine, it can be used for processing bicycle and car tire molds. The tilt axis is manual, while the rotation axis is CNC controlled.