Multi functional portable calibrator

1. Both the signal source and measurement operation have an accuracy of up to 0.02% of the DC voltage range
2. Signal source and measurement operation can be performed simultaneously
3. Vertical body, large screen display
a. Loop power supply function (providing 24VDC when the load does not exceed 22mA)
b. Can measure current in mA range while supplying power
3. Sink function
4. The scanning function allows for three types of continuous outputs:
a. Step by step scanning function
b. Linear scanning function
c. Program scanning function

Temperature coefficient: The above accuracy is multiplied by (1/10)/℃
Increase the temperature coefficient for the temperature range of 0-18 ℃ and 28-40 ℃

General specifications for signal source units

1. Signal source unit response time: approximately 300ms, limited to 1V, 10V, 500 Ω (excitation current 1mA). Response time is approximately 5ms (time from output to entering accuracy range)
2. Voltage limit of signal source unit: approximately 32V
3. Signal source unit current limit: approximately 25mA
4. Output polarity switching: enabled
5. Step by step output (n/m) can be set within the range of n=0-19 and m=1-19. Condition: n/m
6. When selecting the step by step (n/m) function, the automatic scanning of the n value can be selected from the following options: 5 seconds, 10 seconds, and step by step.
7. The linear scanning function and linear output function can select scanning time from the following options: 16 seconds and 32 seconds.
8. The program scanning function outputs the signal source values saved through the data storage function in the order in which the data is stored in the memory.
9. Maximum step setting: 100 sets of data can be selected from the following options for output settings: 5 seconds, 10 seconds, and step.