​

Ruoke servo press fitting machine systemThe ROCK PRESS FITTING SYSTEM consists of a host, control computer, and rack (optional), with a compact structure and a powerful aesthetic. While experiencing the convenience brought by technology, it makes press fitting work a relaxed and enjoyable experience. hostThe model structure is divided into four pillarsC-type machine (it is recommended to use a four column machine for 2T and above models for greater stability and longer travel. ）

C-type servo presser_C type presser_C type press fitting machineFeatures:

1：The main structure of the host is driven by an electric cylinder, which is preferred for ball and roller screw transmission. The economical and applicable type can be usedT-shaped screw, customers can customize according to their own precision requirements,Ruoke press fit systemROCK PRESS FITTING SYSTEMThe software ensures accurate control of parameters such as pressing force, stop position, pressing speed, and holding time throughout the entire process, achieving full process CNC management.

Compared with traditional presses, the characteristics of servo presses are as follows:

1Improve productivity: The travel length can be set to the minimum value necessary for productionCan maintain a forming speed suitable for the processing content，The reasonable definition of the existing Ruoke host, which has been tested through numerous trials, is as follows:0.5T; 2.0T; There are four models available: 5T and 10T, with pressures ranging from 0.1-10T, meeting the basic needs of precision press fit components. If customization is required, non-standard selection can be made.

2、 Energy saving and environmental protection: The dedicated control computer adoptsindependently developedFPGA control board, software, perfect combination of control board and software, different from traditional PLC control, control accuracy and precision have risen to new orders of magnitudePower saving50%-80%.

3、 Safe and precise: Each machine is equipped with an infrared safety grating, effectively protecting operators. The servo intelligent patented control matches the best pressing solutionEnsure that the machine's repeated positioning accuracy can reach0.01mm, Pressure error ± 1%.

4、 Low failure rate: servo intelligent patentworkControl system,The experimental conclusion of the existing C-type servo press, C-type press, C-type press, and C-type press fitting machine through trial and error, malfunctionLow rate, stable and efficient production efficiency, machineThe device is equipped with automatic fault alarm and one key reset function，Real time data feedback.

5、 Stable and durable: The rack adopts a complete machine frame structure, and the body is cast as a whole with built-in sensors. The slider is guided by precision guide rails for operation, which is strong in shock resistance and lateral pressure resistance. The whole machine is stable, precise and durable, suitable forblankingForming and extruding、Punching, cutting, assembling, typingembossingFor various technological purposes.

sixEasy maintenance: The whole machine is designed as a modular structure according to different functional modes, making disassembly and assembly simple. General faults can be directly observed through the touch screen, making maintenance easy.

The rapid development of modern automation industry has led to the development of C-type servo presses, C-type presses, and C-type press fitting machinesAs a new typeEfficient, energy-saving and environmentally friendly productsWith low noise, good environment, low maintenance cost, excellent controllability and stability, it has been increasingly favored and recognized by more and more enterprises. Especially under the current emphasis on energy and environment, the applicationservo pressReplacing hydraulic and pneumatic presses is the future development trend.