【product name】
Alkali spray tower, acid mist spray tower
【PRODUCT MODEL】

【Product Introduction】
New WGL-2 typeAlkali spray toweralso calledAcid mist spray towerIt can be divided into two types: dry and wet. Wet type towers are generally divided into cylindrical towers or square towers. Cylindrical towers are generally vertical towers, while square towers are generally horizontal towers.

【product description】

1、 Preface

Fulaier, TianjinEnvironmental Protection Equipment Co., Ltd. (Waste Gas Treatment Engineering Company),produce,Alkali spray tower, acid mist spray tower,acidwaste gas treatment engineering,have25yearExperience in Environmental EngineeringProduction experience,The product is selling well,Tianjin, Beijing, Hebei, Shandong, Heilongjiang,Jilin,More than 20 provinces and cities including Liaoning,All received positive reviews!

Deep customer trust.

2、 Equipment IntroductionNew WGL-2 typeAlkali spray toweralso calledAcid mist spray tower

It can be divided into two types: dry and wet. Wet type towers are generally divided into cylindrical towers or square towers. Cylindrical towers are generally vertical towers, while square towers are generally horizontal towers. Internally equipped with multi-stage packing rings. During operation, the exhaust gas flows upward from the bottom of the tower. Due to the tangential entry into the tower, especially the guiding effect of the packing layer, the flue gas rotates and rises, allowing the packing layer to fully contact the exhaust gas and spray the downstream liquid into droplets, creating a very large contact area between the gas and liquid; The liquid droplets are driven to rotate by the airflow, generating centrifugal force that enhances the contact between the gas and the liquid at night. They are then thrown onto the tower wall and flow downstream along the wall, passing through the overflow device and onto the next layer of packing. Once again, they are atomized by the nozzle for gas-liquid contact. As mentioned above, liquids can be effectively separated after sufficient contact with gases - a gas-liquid separator is installed at the end of the exhaust gas purification tower to prevent liquid from flowing out.

3、 Product FeaturesOur company producesAlkali spray towerIts gas-liquid load is more than twice that of commonly used packed towers. Due to the thin liquid layer and high porosity on the tray, the pressure drop is relatively low. When achieving the same effect, the pressure drop is about half as low. Therefore, the overall performance is better than that of generalIndustrial waste gas treatment equipment
.

Due to the good gas-liquid contact conditions provided inside the tower and the reasonable equipment design, it has a good purification effect; At the same time, it has good dust removal performance. Dust particles in the gas are removed by water mist adhesion in the packing layer. In addition, dust particles and droplets are thrown to the tower wall by centrifugal force and flow to the bottom of the tower to be removed, thereby reducing the amount of dust particles and droplets carried out of the tower by the airflow.This equipment is also divided into acid gas treatment equipment (hydrochloric acid, sulfuric acid, nitric acid, hydrofluoric acid, chlorine gas, chlorine gas, nitrogen oxides, etc.) and organic gas treatment equipment according to the different components of the treated exhaust gas（Benzene derivatives, organic chlorides, Freon series, organic ketones, amines, alcohols, ethers, esters, acids, and petroleum hydrocarbon compounds

）
Organic waste gas treatment equipment. Our factory will select cost-effective products for customers based on different types of exhaust gases.
4、 Scope of application:
Acidic gases: sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, etc;

Alkaline gases: sodium hydroxide, potassium hydroxide, ammonia, etc;

Organic gases: benzene, alcohols, phenols, etc. Different absorption liquids are used to treat different harmful gases.

5、 Structure and working principle:
The alkali liquor spray tower is composed of tower body, liquid tank, spray system, filler, gas-liquid separator, etc. According to different media, PVC PP、 Made of fiberglass, carbon steel, and stainless steel. The waste gas enters the tower body from the lower air inlet, and then is purified by liquid through the packing layer and spray device. The purified gas is discharged to the atmosphere through the gas-liquid separator and the ventilator. The spray system uses the HHSJ nozzle of the United States, which has a good atomization effect, so it has a prominent purification effect.
6、 Precautions for use:
(1) The acid mist purification tower, acid mist absorption tower, and acid mist purifier should be installed on a corrosion-resistant foundation 100mm above the ground, with an additional anti-corrosion foundation for the acid resistant water pump;
(2) This equipment should be installed indoors (in northern regions) to prevent the impact of cold winter on the equipment and absorbent solution, or to take moisturizing measures. Equipment in southern regions can be installed outdoors;

(3) If no pH control device is added, it is necessary to regularly check the concentration of acid and alkali solution and adjust it at any time;

(4) Regularly check the blockage of nozzles and fillers, and promptly clean up any problems encountered.7、 RemarksThis product can be ordered separately or together with the fan, pipeline, and fittings. The company can also send technical personnel to inspect the site and provide detailed purification treatment plans according to the actual situation.Our company can also provideacid

waste gas treatment engineering.Search for specific detailsAlkali spray tower, acid mist spray tower,

Please refer to the product catalog on our company's websiteSearch or directly call for consultation.