The introduction of this machine is specifically designed to solve the high labor intensity of chicken farm workers and address the non-standard layout of facilities in small and medium-sized chicken farms. Its unique structure, novelty and practicality, time-saving and labor-saving, uniform feeding, and low loss are adopted. It is powered by batteries and driven by DC motors, with low noise, easy operation, flexible steering, small turning space, and convenient maintenance. At the same time, it can feed three to four layers, and the feeding amount can be adjusted. It effectively improves work efficiency and is a pioneer in both structure and performance, making it an ideal replacement equipment for chicken farms.

1： Overview

At present, most of the commonly used chicken farm feeders in China are large-scale automatic assembly lines. Although they have good performance, their prices are too high and they are not suitable for use in small and medium-sized chicken farms with non-standard facilities. Nowadays, manual feeding is commonly used for small-scale chicken farming, which is labor-intensive, inefficient, and unevenly distributed. At the same time, dust flies during feeding, affecting human health. This machine has been specially developed and designed to address the aforementioned shortcomings. Its unique and innovative structure saves time and effort in use, truly freeing breeding workers from heavy physical labor.

This machine uses a low-voltage battery as its power source, which is safe and reliable. It is powered by a ballast motor, which ensures smooth movement, uniform feeding, and adjustable feeding amount. It can effectively improve work efficiency and reduce feed loss. Both its structure and performance are pioneering, making it an ideal supporting equipment for breeding farms.

2： Structural characteristics

1: This machine consists of a power system, a walking system, a lifting system, and other structural components.

2: This machine uses a low-voltage battery as the power source, a DC motor as the power source, and a unique transmission mechanism to scientifically convert power in advance, achieving one pole input and multiple pole output, and making rational use of energy.

3: The walking part consists of a transmission shaft, a circular wheel, a steering wheel, and other parts. Due to the design borrowed from automotive chassis technology, it ensures that the feeder travels smoothly, has flexible direction, and has a small turning radius,

4: The lifting part adopts spiral lifting, which is designed to be simple, easy to use, maintain, and has high work efficiency. The feeding amount can be adjusted, and it can feed three to four layers at the same time, suitable for feeding powder or granular materials.

3： Installation and debugging:

Before installation and debugging, please read the instruction manual carefully and correctly understand all the contents in the manual

1: Install according to the book title and attached diagram, and ensure that all fasteners are securely fastened after installation. The transmission parts are flexible and operate smoothly, and lubricating oil should be added to each operating part and gearbox.

2: To ensure smooth and straight operation of the feeder during operation, track laying is required in the chicken coop. Adjust the chicken coop channels of all feeders to have the same width, the same height of the chicken cages, and parallel and neat arrangement. b， Fix the 3 * 30 angle steel on the ground plane according to the position of the guide wheel. Pay attention to the smooth and even joint position, and the weld should be on the back of the angle steel. When laying, first mark the track position as a true lineDrill 6mm holes in sections on a straight line, insert 6mm * 100mm round steel into the holes, raise them 17mm above the ground, and then cover the connected angle steel with the round steel, making both ends retreat into the chicken cage by 500-300mm.

3: The adjustment of the width of the feeder and chicken coop channel is divided into two models: A and B. The A-type feeder has a width of 600mm and is suitable for use with channel widths between 650-800MM. Additionally, there should be a space of 1.5-2.0M at both ends of the chicken cage for the feeder to turn around.

4: Adjustment of feeding amount: There is no feeding adjustment port at the lower end of the feeding tube of this machine, which can be adjusted appropriately according to the feeding amount of the chicken. When the feeding amount is small, adjust the feeding port strip at the lower end of the feeding tube to be smaller, otherwise, increase it.

5: Operation and use: Align the front guide wheel of the feeding machine filled with feed with the ground rail laid on the ground, push it up, align the feeding tube with the chicken trough, adjust the feeding port size according to the required feeding amount, close the feeding clutch, and when there is feed flowing out of the feeding tube, close the walking clutch. The feeding machine moves forward at a constant speed while the feed evenly falls into the chicken trough. After reaching the end, first separate the feeding clutch, and then separate the walking clutch. If there is enough space at both ends of the chicken coop, you can jump throw directly. Otherwise, you can pull the flip handle on the feeder to make

feeding hopperFlip to the vertical position of the feeding pipeline to reduce the turning radius

4： Main technical parameters:

1. Applicable current: 36V DC

2: Maximum power 450W, 650W (4 layers)

3: Maximum load capacity 150KG

4: Operation mode: Ground rail operation

5: Materials used: powder, granular materials

6: Maximum operating speed of 20 meters per minute

5： Charging

When the display on the feeder voltmeter is below 31.5V, it should be stopped immediately and charged in a timely manner. (Note that 31.5V is the lowest protection voltage for 36V batteries, which means the voltage should be kept above 31.5V during normal use.) When charging, first insert the charger output plug into the charging socket on the battery box, and then plug in the power plug. At this time, the charging indicator light of the charger is red, indicating that the battery is sufficient. You can unplug the plug and stop charging

6： The main performance of the charger

This charger is a standard three-stage charger. The first stage is to charge the battery with a constant current, and after the voltage reaches the predetermined voltage value, it is converted to the second stage of constant voltage (limited voltage charging, and then as the battery power increases, the charging current gradually decreases, but when the current decreases to a certain extent, the charger will automatically switch to the third stage float charging mode to perform trickle charging on the battery. At this time, the charging indicator light on the charger changes from light to green, and the power can be temporarily not turned off. Generally, charging takes 3-8 hours.)

7： Charging precautions

1：FeederDo not use it when it is not fully charged or when the battery has dropped to its lowest level. When not in use for a long time, please ensure that the battery is fully charged before placing it, and then charge it once a month. At the same time, turn off the power. After using the machine every day, it is important to charge it promptly to ensure sufficient battery power, which is beneficial for protecting the battery and improving its durability.

2: When charging a charger, there is a certain amount of heat, so please maintain a well ventilated environment, avoid approaching flammable and explosive materials, sofas, beds, carpets, and similar surfaces, and place them out of reach of children.

3: Do not use chargers with incompatible batteries for charging.

4: The charger provided with this feeder is a dedicated type and cannot be used for other purposes.

5: There is high voltage inside the charger, and non professionals are not allowed to open it at will. It cannot be used in supermarkets or places where it is wet,

6: Cannot play to prevent electric shock.

7: Technical parameters of charger

Input voltage: 90V-240V, 50AZ

Output voltage: 36V (unloaded) 41.8V

Input current: 1.6A-3.5A

Work status display: Charging red light on, fully charged green light

Charging method: Intelligent three-stage charging

Application battery pack capacity: 5AH-30AH battery pack

Operating environment: -10 ° C to 65 ° C

Special reminder to users: Do not dispose of the used battery by yourself, and it should be handed over to a specialized recycling agency for recycling.

Harbin Yongxing MachineryMechanical equipment