Barcode printer CAB EOS5-Global supplier

2nd Floor, Building D, Huangniling Industrial Zone, Wentang Zaoyi (2) Village, Dongcheng District, Dongguan City, Guangdong Province

Overview of EOS barcode printer models

One concept, two sizes

The EOS series combines all functions into a barcode printer that is easy to operate and has a stable body.

EOS5- Special for Large Label Paper Roll

The maximum label paper roll is 203 mm

technical details

1 paper roll baffle

After inserting the label paper roll, locking the paper roll stopper can automatically center the label paper roll.

2 Carbon ribbon fixed shaft

The fixed shaft can be adjusted according to the width of the carbon ribbon.

3 print heads 203/300 dpi

The print head can be manually replaced without any tools during cleaning or maintenance.

4 Penetrating or Reflective Label Sensors

The sensor position can be adjusted by turning the red knob through the adjustment lever. The sensor's position can be confirmed through LED lights.

5 Printing Roller DR4

The printing roller can be replaced without tools during cleaning or maintenance.

6 Label paper guide clip

You can adjust the printing width area by turning the adjustment knob according to the label width.

7 Tear off paper baffle

Made of thin steel sheets; It is serrated, so the label can be torn off neatly

DR4-25

DR4-50

When using narrower labels and carbon tapes, specialized printing rollers are also required to achieve precise printing. It can avoid printing roller wear, print head scratches, and errors during label feeding.

control panel

Intuitive and easy to operate, combined with clear and understandable graphics, make it convenient to adjust the body settings

1 LED light display: power on

2 status columns: receive printed data, record data stream, carbon ribbon depletion warning, SD memory card/USB flash drive, Bluetooth, WLAN wireless network, Ethernet network, USB Slave transmission interface, time

3 status notifications: standby, pause, number of labels completed per print job, labels that have been peeled off, waiting for external signals

4 Peripherie buttons

Cutting knife/dotted line cutting knife dedicated: direct cutting

Tear off mode dedicated: print the next label

5 USB slots: For maintenance use with a USB flash drive or dedicated USB drive, files can be uploaded to the built-in flash memory of the device.

6operation

Sprung Jump to menu