Product model: BIOBASE-II-20L

Performance characteristics of deionized water machine:

1. Fully automatic pressure sensor control operation, RO membrane automatic anti scaling flushing, automatic shutdown when tap water is cut off, automatic water cut-off when shutdown, automatic replenishment of water storage tank, automatic shutdown when water storage tank is full.

2. After turning on the power, the machine first enters the automatic infusion program to exhaust the gas in the system to prevent damage to the reverse osmosis membrane caused by gas hammer phenomenon, and then automatically enters the water production program. This not only reduces the self pollution of the reverse osmosis membrane, but also avoids the consumption and pollution of low water quality effluent on the subsequent resin in the early stage of reverse osmosis membrane operation, prolongs the service life of the reverse osmosis membrane and resin, saves consumables, and improves the effluent quality. Pressure tank pressure automatic control on/off.

3. This machine also has a low water pressure protection function. It can effectively prevent the water machine from working under low water pressure and shortage of source water, providing reliable protection for the high-pressure pump head.

4. Inlet requirements: Municipal tap water (or TDS value less than 500ppm), inlet water pressure of 0.05-0.3Mpa during operation, water temperature of 15-35 ℃, and water quality in accordance with GB57492 regulations.

Technical parameters of deionized water machine:

1. Rated voltage and frequency of power supply: 220 ± 20V, 50 ± 1Hz

2. Input power: 200W

3. Optimal operating pressure: 0.5Mpa

4. Water production rate: 20L/H (25 ℃, pure water pressure is 0)

5. Produced water quality: 18M Ω· cm (or ≤ 0.1us/cm) meets the standards for high-purity water used in national laboratories (attached: Chinese National Laboratory Water Specification GB6682-2008)

6. Operating environment temperature: 15-35 ℃

7. Relative humidity of the usage environment: ≤ 80%

8. Ionic column resin water production capacity ≥ 1500L