B3-027 Plate Heat ExchangerWe can provide different types of fittings such as welding and threading according to customer requirements.

Channel of brazed plate heat exchanger: Theoretically, a heat exchanger can mix different types of channels, such as H-type. However, in the case of phase transition, this can lead to an imbalance in the distribution of the medium between the H-channel and the M-channel. Therefore, it is not used in various types of brazed plate heat exchangers for refrigeration.

H channel: a channel composed of adjacent plates with large angles.

M channel: a channel composed of adjacent plates with large/small angles.

L channel: a channel composed of adjacent small angle plates.

Characteristics: H-channel, high heat transfer coefficient, high resistance, suitable for low flow but strong heat transfer situations, such as refrigerant phase change heat transfer.

M channel: The heat transfer coefficient and resistance are between H and L channels.

L channel: Low heat transfer coefficient, low resistance, suitable for situations with high flow rate and weak heat transfer, such as air heat transfer under ambient pressure.

Heat exchange capacity: 1 KW to 450 KW

Operating temperature:- 195oC to +200oC

High design pressure: 60 bar

Plate material: Various imported stainless steels and duplex steels such as AISI 316L, 304L, SMO 254, etc

Brazing method: Copper nickel welding

Takeover: threading, welding, crimping, etc

Applicable medium: R134a, R22, R410A, Water, oil, etc

Widely applicable in various fields such as refrigeration, air conditioning, heating, refrigerated dryers, hydraulic systems, etc.

Danfoss PHE B3-012 brazed plate heat exchanger

Danfoss PHE B3-014 brazed plate heat exchanger

Danfoss PHE B3-014B brazed plate heat exchanger

Danfoss PHE B3-014C brazed plate heat exchanger

Danfoss PHE B3-018 brazed plate heat exchanger

Danfoss PHE B3-020 brazed plate heat exchanger

Danfoss PHE B3-027 brazed plate heat exchanger

Danfoss PHE B3-030 brazed plate heat exchanger

Danfoss PHE B3-048 brazed plate heat exchanger

Danfoss PHE B3-052 brazed plate heat exchanger

Danfoss PHE B3-095 brazed plate heat exchanger

Danfoss PHE B3-095B brazed plate heat exchanger

Danfoss PHE B3-113 brazed plate heat exchanger

Danfoss PHE B3-136 brazed plate heat exchanger

Danfoss PHE B3-210 brazed plate heat exchanger

Danfoss PHE B3-260 brazed plate heat exchanger

Most of the above models are available for copper brazed and nickel brazed plate heat exchangers, with plate materials available in 316L, 304L, and SMO254. Please confirm when placing an order.

The altitude shall not exceed 2000 meters, the surrounding air temperature shall not be higher than+40 ℃, not lower than -5 ℃, and the average temperature within 24 hours shall not exceed+35 ℃.
The installation location has clean air, and the relative humidity of the atmosphere should not exceed 50% when the ambient temperature is 40 ℃. The average relative humidity in humid months is 90% when the average temperature is 25 ℃, taking into account the condensation that occurs on the surface of the product due to temperature changes.

Note: In order to facilitate the maintenance and updating of existing electrical equipment for users, a special design has been made to useB3-027 Plate Heat Exchangerreplace

If you wish to learn moreB3-027 Plate Heat ExchangerFor details such as product specifications, prices, maintenance and replacement, please contact us.