Autosamdri-815B, Series C critical point dryer

characteristic:

• Vertical supercritical point dryer after the release of 4 "round crystal MEMS;

• The internal high-efficiency insulation cooling circulation system enables the system to quickly drop from room temperature to nearly 0 ° C;

• Post Purge filters are easy to replace and maintain;

• Built in SOTERTM condenser, separates waste ethanol and exhaust carbon dioxide.

• The unique sample chamber filling block can adjust the diameter of the sample chamber to 3 ", 2", 1.25 ", maximizing the efficiency and processing time of LCO2;

• It is possible to dry 5 pieces of round crystals with a diameter of 4 "at once and replace the sample holder. It is also possible to dry 5 pieces of round crystals with a diameter of 3" or 2 "or 5 pieces of square crystals with a side length of 10mm at once (providing HF compatible sample holders);

• The interior is equipped with lighting fixtures, and the sample chamber cover has an observation window for easy observation of the internal state of the sample chamber;

• Ensure the repeatability of the automatic processing process and results through a microprocessor controller;

• All inner surfaces are suitable for liquid carbon dioxide, high-purity ethanol, and acetone;

• The repeatable operation parameters ensure the repeatability of the results;

• Integrated automatic temperature control;

• Built in disc fragments ensure safety;

• Static pressure control module, automatically controls system pressure and maintains pressure stability;

• The 0.4 μ m internal filter system delivers clean filtered LCO2 to the sample chamber;

• Each operation mode is displayed on LED, making it clear at a glance;

• Cleanroom and anti-static compatible design;

• All electrical components comply with UL, CE, and U S. Military standards;

Specifications:

• External dimensions: Width 19.8 "(50.3 cm) x Depth 31.7" (80.6 cm) x Height 44.5 "(113.0 cm);

• Installation footprint size: width 27 "(68.6 cm) x depth 38" (96.5 cm);

• Sample chamber size: inner diameter 4.5 "x depth 1.25", sample chamber volume: 326 ml;

• Temperature range: -30 ℃ to 60 ℃, pressure range: 0-2000 psi;

• The flow rate of LCO2 is controlled by a micro metering valve with a vernier caliper;

• 120V/50-60HZ (optional other voltages);

Standard accessories:

• High pressure stainless steel LCO2 tube (lined with Teflon) 3 meters long;

• External LCO2 filtration device, capable of removing water/oil and particles (as small as 0.5 μ m), can be pre connected to LCO2 pipes for easy installation;

• Installation tools;

• Anti static exhaust pipe, used for exhaust during PURGE/VENT/BELED and COOL;

• The internal stainless steel filtration system and nickel plated filtration system jointly protect the lines, chips, and valves

• Three O-rings in the sample room, two lighting fixtures in the sample room, and two 3A and 8A fuses each;

• Three Teflon sample chamber fillers are used to fill the chamber with diameters of 4, 3, 2, and 1.25 inches;

• Sample racks with diameters of 4, 3, and 2 inches for round crystals and 10 mm for square crystals, compatible with HF;

• Flow meter, which can accurately control the exhaust rate of BLEED;

• user 's manual;

• All components come with a one-year warranty.