Atlas ™ Standard thin film prototype and high-temperature thin film sampling system

Specac's equal thickness thin film sampling tool is mainly used for spectroscopic determination of polymer materials. According to the principle of hot pressing film, the obtained sample is a pure sample, and only sample information appears in the spectrum. Specac provides three types of equal thickness film sampling tools to meet the different needs of customers. They can not only turn thicker polymers into thinner films, but also turn irregular polymers such as granular, block or sheet materials, such as drug packaging materials, packaging materials, special wrapping materials, etc. into detectable films.

GS15800High temperature thin film sampling system

Technical parameters:

· The maximum operating temperature can reach up to 400 ℃, meeting the requirements of high-end scientific research

· One cycle of 40 minutes

· Passed CE safety certification

· Integrated heating and cooling equipment? 2T load limit

· 0.015, 0.025, 0.050, 0.100, 0.250, 0.500mm

· Film diameter 29mm

· Pressure range 0-2 tons

· Integrated heating plate system

· Dual digit display with an accuracy of 1 degree

· Safe switching device: Cut off heating at 70 ℃/restart heating system at 55 ℃

· Integrated cooling plate

The high-temperature film prototype P/N GS15800 has a set of heating plates embedded in the film prototype, so when P/N GS15800 is loaded under pressure

When on the wafer machine, there is no need for additional Atlas heating pressure plate P/NGS15515.

ordering information

GS15640Standard film prototype

characteristic:

Independent heating pressure plate to meet the needs of films with different diameters

Independent cooling plate can shorten the film making cycle

Reproducibility, simple preparation process

The film making process does not require chemicals and has low cost

6Different thicknesses of gaskets suitable for various polymer materials

Technical parameters:

· Operating temperature up to 300 ℃

· One cycle of 30 minutes· Load limit of 4T

· 0.015, 0.025, 0.050, 0.100, 0.250, 0.500mm

· Film diameter 29mm

· Dual digit display, accuracy ℃

· Can be used with heating plate P/N GS15515

· When the cooling system stops, cut off the heating system. When the cooling water flow rate is greater than 0.2/min, restart the heating system

· Independent cooling box

ordering information

GS15640 Atlas™ Standard film prototype

Including: 0.015, 0.025, 0.050, 0.100, 0.250, and 0.500 mm washers

Aluminum film diameter 40mm (200 pieces)

Specacards card clamp type, circular through-hole diameter 10mm, sample holder (20 sheets)

Stainless steel tweezers

GS15800 Atlas™ High temperature thin film sampling system

include: 0.015, 0.025, 0.050, 0.100, 0.250 and 0.500 mm washers

Aluminum film diameter 40mm (200 pieces)

Tool for making aluminum film sample cups

Specacards card clamp type, circular through-hole diameter 10mm, sample holder (20 sheets)

Stainless steel tweezers

High stability and precision temperature controller (400 ℃)

Thin film sample set

GS15631 Atlas™ Standard film sample set 1

Including: film sampling system (GS15640) heating plate and heating pressure plate, as well as digital fully automatic temperature controller (300 ° C) (GS15515)

GS15633 Atlas™ Standard film sample set 2

Including: film sampling system (GS15640) heating plate and heating pressure plate, as well as digital temperature controller (300oC) (GS15515)

15T manual hydraulic press (GS15011)

(For GS15800, GS15631, and GS15633, please specify the voltage of 220V or 110V and the country of use.)

GS15800 Atlas™ High temperature thin film sampling system kit

Including: High temperature film sampling system (GS15800) 15T manual hydraulic press (GS15011)

(Please specify the voltage of 220V or 110V and the country of use.)

Spare parts and consumables

GS03800Clip on type, circular light hole diameter 10mm, sample holder(100 sheets/box)

GS03805 Nylon snap spring (20) for fixing stretchable film samples

GS03810 10mm x 25mm rectangular through-hole Specacards (100)

GS03820 magnetic thin film sample holder with circular through-hole diameter of 25mm

GS15627 40mm diameter aluminum film (200)

GS15641 cooling box is used for replacing standard film sampling systems

GS15642 standard film sample pressure plate set

GS15629 standard thin film prototype replaceable gasket component

Gasket components replaceable for GS15805 high-temperature thin film prototype