Anode vibration hammer
Our company produces vibration components: anode vibration hammer, cathode vibration hammer, hammer head, vibration drill, clamp, dust cover, dust cover, upper and lower fork, anode gear plate, cathode gear plate, coupling joint, cathode drive shaft, vertical shaft support plate, bearing seat, dry grinding dust bearing, vertical shaft bearing, center dust bearing, dust bearing, three wheel vertical bearing, four-wheel vertical bearing, four-wheel dust bearing, impact head, dust bearing limit, etc.
Spray type dust collector: In the dust collector, water is sprayed into a mist through a nozzle. When the dusty flue gas passes through the mist like space, the dust particles fall down with the droplets due to the collision, interception, and coalescence between the dust particles and the droplets. This type of dust collector has a simple structure, low resistance, and easy operation. Its outstanding advantage is that the dust collector has very small gaps and holes inside, which can handle smoke with high dust concentration without causing blockage. Also, because the droplets it sprays are relatively coarse, there is no need for mist nozzles, which makes the operation more reliable. The spray type dust collector can use circulating water until the particulate matter in the washing solution reaches a considerable level, greatly simplifying the water treatment facilities. So this type of dust collector is still widely used by many enterprises today. Its disadvantage is that the equipment has a relatively large volume, low ability to handle fine dust, and requires a large amount of water. Therefore, it is commonly used to remove smoke with large particle size and high dust concentration