HT-1000A Technical Parameters:

1. Test range: 200-900HL

2. Hardness types: HL, HV, HB, HRB, HRC, HSD

3. Accuracy:+/-4HL or 0.5% (taking the average of 5 test points within the range of 800HL)

4. Test direction: Customization

5. Tested materials: low carbon steel, high alloy steel, stainless steel, bearing steel, gray cast iron, ductile iron, aluminum alloy

Brass, Bronze, Copper

6. Temperature: Operating temperature-10 ℃~40 ℃ Storage temperature -20 ℃~50 ℃

7. Power supply: Instrument: 2 3V lithium batteries CR2330

8. Battery life: The hardness tester can work continuously for 40 hours

9. Data storage: can store a set of 10 data

10. Dimensions: 165 * 28 * 28mm

11. Instrument weight: 120g

Standard configuration:

HT-1000Ahardness tester(including tungsten carbide impact body)

Standard Leeb hardness block (domestic)

13mmsupport ring

brushHanging rope

CR2330lithium battery2a

Instruction Manual(One copy in both Chinese and English)

instrumentInspection CertificateTest block verification certificate

carrying case

Terms of Use:

The Leeb hardness testing technology uses dynamic measurement to determine hardness, and its requirements for the weight and thickness of the tested piece are different from those of static bench hardness testers. This instrument can be selected if the following conditions are met:

1．The weight of the tested workpiece should be≥3kgAt the same time, the thickness of the measured points should be≥30mm；

2．The roughness of the tested area should meet the requirementsRa≤2μm；

3．The weight of the tested workpiece≤3kgAnd the thickness is3～30 mmThe shape of the workpiece is regular and compact, and it should be coupled onto the working platform;

4．The thickness of the hardened layer on the surface hardened workpiece should be≥0.8mm；

HT-2000ATechnical Specifications:

1. Test range: 200-900HL, 32-940HV, 30-670HB, 4-100HRB, 20-68HRC, 32.5-99HSD

2. Hardness types: HL, HV, HB, HRB, HRC, HSD

3. Ultimate tensile strength: Kgf/mm2（38-267 Kgf/mm2）

Tons/in2（23-135 Tons/in2）

Lbs/in2（54-382 Lbs/in2）

4. Accuracy:+/-4HL or 0.5% (taking the average of 5 test points within the range of 800HL)

5. Test direction: Any

6. Tested materials: low carbon steel, high alloy steel, stainless steel, bearing steel, gray cast iron, ductile iron, aluminum alloy, brass, bronze, copper

7. Temperature: Operating temperature-10 ℃~40 ℃ Storage temperature -20 ℃~50 ℃

8. Power supply: Instrument: 2 3V lithium batteries CR2330 Printer: Lithium rechargeable battery

9. Battery life: The hardness tester can work continuously for 40 hours, and the printer can print over 6000 lines

10. Data storage: capable of automatically recording 500 test results

11. Dimensions: 165 * 28 * 28mm

12. Instrument weight: 120g

Standard configuration:

HT-2000Ahardness tester

PORTI-S printer

Printer charger

Standard Leeb hardness block (domestic)

13mmsupport ring

printing paper

brush

CR2330lithium battery2piece

Chinese-English translationInstruction Manual

instrumentInspection Certificate(The certificate inspection unit is our company)

Test block verification certificate (certificate submitted by our company)

carrying case

Warranty:The instrument host has a two-year warranty, and the impact ball head is a vulnerable part that is not covered by the warranty

Terms of Use:

The Leeb hardness testing technology uses dynamic measurement to determine hardness, and its requirements for the weight and thickness of the tested piece are different from those of static bench hardness testers. This instrument can be selected if the following conditions are met:

1．The weight of the tested workpiece should be≥3kgAt the same time, the thickness of the measured points should be≥30mm；

2．The roughness of the tested area should meet the requirementsRa≤2μm；

3．The weight of the tested workpiece≤3kgAnd the thickness is3～30 mmThe shape of the workpiece is regular and compact, and it should be coupled onto the working platform;

4．The thickness of the hardened layer on the surface hardened workpiece should be≥0.8mm；