2. Main specifications and technical parameters:

☆Longitudinal travel (X-axis): 4500 mm

☆Lateral travel (y-axis): 500 mm

☆Vertical travel (z-axis): 550 mm

☆X-axis running speed: 0-60 m/min

☆Y-axis running speed: 0-30 m/min

☆Z-axis running speed: 0-20 m/min

☆Spindle speed: 0-10000 rpm

☆Spindle power: 7.5 kw/11kw

☆Tool library: BT40 24 tool position, disc tool library

☆Maximum installation length of cutting tool: 135 mm

☆Knife handle: BT40 knife handle

☆Knife handle pull nail: BT40 45 degrees

☆Gas source: 0.5-0.8 MPa

☆Power supply: 380V/50 Hz

☆Total installed power: 21 kW

☆Lubrication and cooling: grease lubrication, cutting fluid cooling

☆Processing size range (width x height x length): 4500 x 500 x 400mm

☆Processing form: One clamping can process various holes on the flat surface of the part

☆Dimensions (length x width x height): 8500 x 2800 x 2800mm

☆Net weight of machine tool: 7000kg

3. Main processing accuracy:

☆Positioning accuracy: ±0.05mm

☆Repetitive positioning accuracy: ±0.02mm

☆Processing accuracy: ±0.1mm

☆Surface roughness of cutting Ra6.3 μ m

4. Main component configuration:

☆Numerical Control System: FANUC from Japan

☆Each servo axis drive: FANUC from Japan

☆Mechanical spindle: Taiwan Pusen POSA

☆Disc type knife magazine: Taiwan North Ju POJU

☆Servo spindle motor: FANUC from Japan

☆Rack: Atlanta, GermanyATLANTA

☆Linear guide rail: Taiwan Shangyin HIWIN/Yintai PMI

☆Pneumatic components; Japan SMC

☆Low voltage electrical appliances: Siemens, Germany