VIP member
AE flow integrator
The AE series flow integrator is suitable for measuring various liquids, general gases, natural gas, and steam
Product details
The AE series flow integrator is suitable for measuring various liquids, general gases, natural gas, and steam. Widely used for flow measurement and control in industries such as petroleum, chemical, metallurgy, power, food, medicine, energy, aerospace, biology, and mechanical manufacturing.
Main technical indicators:
Input signal:
Simulation:Voltage 0-5V, 1-5V or mV, resistance Pt100
Current 0-10mA, 4-20mA or 0-20mA, thermocouple K, E
Pulse:Square wave, sine wave or triangular wave waveform
The amplitude is greater than 4V (or determined according to user requirements)
Switch:Start, stop, reset
Amplitude photoelectric isolation input, greater than 4V (or determined according to user requirements)
Output signal:
Simulation:0-10mA(?750W)??? 4-20mA(?500W)
0-5V (250W)?????? 1-5V(?250W)
Switch:Relay control (AC220V/3A, DC24V/5A, resistive load)
Feed:DC24V/30mA
signal communication:2、 Three or four wire system, with variable baud rate
Accuracy:
Measurement display:0.2% FS ± 1 word or 0.5% FS ± 1 word
Frequency conversion:± 1 pulse (LMS), generally better than 0.2%
Display mode:
Instantaneous flow measurement value display from 0-999999, cumulative display from 0-9999999
-Temperature compensation measurement value display from 1999 to 9999, pressure compensation measurement value display from 1999 to 9999, flow (differential pressure, frequency) measurement value display from 1999 to 9999, current time display, LED working status display, high brightness LED digital display
Control method:ON/OFF brings back the difference
Printing control:
Directly connect to various serial micro printers, communication mode RS-232
Printing accuracy:Measurement accuracy of the same instrument
Alarm method:
Optional relay upper and lower limit alarm output, LED alarm display
Quantitative control method:
Optional relay flow quantitative control, LED output indication
Optional relay flow quantitative process control, LED output indication
Alarm accuracy:± 1 word
Communication method:
Bidirectional serial communication, such as RS-232, RS-422, RS-485, etc
Baud rate 300-9600bps, internal parameters can be freely changed
Implement communication between multiple instruments and PCs using master-slave communication method
Setting method:
Panel touch sensitive button numerical setting, permanent parameter protection, password can be set
Protection method:
The undervoltage program automatically resets, and the abnormal operation program automatically resets,
The cumulative value of power-off protection is greater than two years, and the set parameters are permanently maintained
Usage environment:
Temperature 0-50 ℃
Relative humidity? 85RH
Power Supply:
AC220V+ 10-15%,50±2Hz; AC90-260V; DC 24V±2V
power waste:?6W
Structure:Standard card in type
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-