2WWire mouth solenoid valve for water (brass)overview：

Copper wire solenoid valve for water is an industrial equipment controlled by electromagnetic force, which is an automation basic component used to control fluids. It belongs to actuators and is not limited to hydraulic and pneumatic systems. It is used in industrial control system to adjust the direction, flow, speed and other parameters of medium. Electromagnetic valves can be used in conjunction with different circuits to achieve the desired control, while ensuring the accuracy and flexibility of the control. There are many types of solenoid valves, and different solenoid valves play a role in different positions of the control system. The most commonly used ones are one-way valves, safety valves, directional control valves, speed regulating valves, etc.

The 2W brass solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The valve body will be attracted to which side when the magnetic coil on the other side is energized. By controlling the movement of the valve body, different oil discharge holes can be opened or closed. The oil inlet hole is normally open, and hydraulic oil will enter different oil discharge pipes. Then, the pressure of the oil will push the piston of the cylinder, which in turn drives the piston rod, which drives the mechanical device. In this way, the mechanical motion is controlled by controlling the current on and off of the electromagnet.

2WPrinciple of brass threaded solenoid valve for water:

When the 2W brass threaded solenoid valve is powered on, the electromagnetic force opens the pilot hole, causing the pressure in the upper chamber to rapidly decrease, creating a high and low pressure difference around the closing member. The fluid pressure pushes the closing member upward, and the valve opens; When the power is cut off, the spring force closes the pilot hole, and the inlet pressure quickly forms a lower and higher pressure difference around the closing valve through the bypass hole. The fluid pressure pushes the closing valve to move downward and close the valve.

2WFeatures of brass threaded solenoid valve for water:

The 2W solenoid valve adopts a two port (through) two position direct acting diaphragm structure for pressure free starting, greatly expanding its application field. The use of a flat membrane structure for reliable opening and closing greatly enhances the service life of the product. The use of plastic sealed coils can improve the safe use of this product in many environments. Applicable media: liquids, water, hot water, gas, oil, gas, etc. Please pay attention to the following details:
1、 If used in food machinery and drinking water, food grade silicone rubber PYMQ can be used as the sealing material when ordering.
2For those who install manual devices, the valve switch can be manually operated in case of power failure or emergency.
3If flange connection is required, it can be requested during ordering.

2WStructural diagram of brass threaded solenoid valve for water:

2W brass water solenoid valve, 2W series solenoid valve. The valve body is forged and the internal parts are made of stainless steel. It is used for automatic control of liquid and gas media in pipelines. Two port, two position direct acting solenoid valve, open when powered off and close when powered on. The valve body material is copper, with a maximum pressure resistance of 17kgf/cm2. The ambient temperature ranges from 0 ℃ to 65 ℃. The product series is produced with small volume, large flow rate, and wide applicability. It can be installed freely according to the flow direction arrow on the valve; To enhance the service life, it is best to install the coil upwards and horizontally

2WApplication of brass threaded solenoid valve for water use ：
Applied in industries such as medical machinery, solar energy, cleaning equipment, food machinery, burners, welding and cutting, fire safety, environmental water treatment, and machinery manufacturing.

2WTechnical parameters of brass threaded solenoid valve for water use:

2WInstallation dimensions of brass threaded solenoid valve for water:

2WPrecautions for installation of brass threaded solenoid valve for water:

1. Install the solenoid valve, and the arrow mark on the valve body should be consistent with the flow direction of the pipeline fluid.

2. The label parameters on the solenoid valve should match the actual usage requirements. Please pay special attention to the rated voltage marked.

Warning: This valve is not equipped with explosion-proof devices and cannot be used in places with explosive hazards.

Ordering Notice:

1、 ①2WProduct name and model of brass threaded solenoid valve for water use ②2WIs the brass threaded solenoid valve for water with a diameter of ③ equipped with accessories so that we can correctly select it for you.

2、 If already selected by the design unit2WPlease refer to the model of the brass threaded solenoid valve for water use2WThe model of brass solenoid valve for water use can be ordered directly from our Huaguang Valve Sales Department.

3、 When the usage situation is very important or the environment is complex, please provide design drawings and detailed parameters as much as possible, and our Huaguang valve experts will review and control them for you.

Dear customer:

Welcome to visit our website http://www.cnbgfm.com/ First of all, thank you for your attention to our Huaguang Valve. If you have any suggestions or questions about our products or services, please contact us immediately! We will do our best to provide you with high-quality service!