HY-021C Computer Servo Tensile Testing MachineParameters:

1. Accuracy level: Level 0.5

2. Sensor: * 0.2/0.3 high-precision force sensor, with excellent linearity, good repeatability, and high acquisition frequency.

3. Capacity selection: Choose one from 5010020050010002000N

4.Test force range: 0.4% to 100% FS

5.Strength accuracy: within ± 0.2%

6.Power decomposition degree: 1/2000000

7.Power amplification factor: Full automatic shifting switch: X1, X2, X5, X10, X20, X50, X100, a total of seven sections

8.Displacement resolution: 0.0005mm

9.Control system: Imported servo controller

10.Power source: AC brushless servo motor

11.Transmission screw: adopts imported double structure precision gapless rolling ball screw

12.Test speed range: 0.005-500mm/min (fully computer-controlled)

13.Test travel (excluding fixtures): 600mm

14.Dust prevention device: using a folding dust cover to protect the ball screw from dust entering, ensuring the lifespan and accuracy of the ball screw

15.Display system: Material testing machine software independently developed by HY-V based on XP platform

16.Data transmission: RS-232 data transmission, all parameters are saved on the peripheral hardware, and the computer does not need to install any external hardware, greatly facilitating users to replace, upgrade, and maintain the computer themselves

17.Multiple protection devices:

①.Mechanical switch protection for upper and lower limit travel

②. Emergency stop switch brake protection in case of emergency

③. Software overload limit protection

④. Breakpoint shutdown protection

18.Host volume:560x480x1350mm, excluding base and computer desk size

19.Power supply: AC220V 50Hz

20.Weight: Approximately 60kg

HY-025 Computer Servo Tensile Testing MachineFunctional features:

1.Software environment: HY-V software package on the Windows XP platform in both Chinese and English.

2.Language selection: It has multiple language interfaces such as Simplified Chinese, Traditional Chinese, and English that can be freely switched during operation, greatly facilitating the use of the operator.

3.Unit conversion: commonly used forces such as gf, kgf, N, KN, Ibf, as well as displacements such as mm, cm, m, in, etc., have and can be freely converted.

4.Basic function: equipped with the basic parameters of a material testing machine: ① Falling point ②. 0.2% off set ③ Qufu strength ④ Tensile strength ⑤ Elongation rate ⑥ Shear strength ⑦. maximum value ⑧ Fracture value ⑨ Deformation amount ⑩ Average value ⑾ Compare the parameters of 20 models, including graphics, etc

5.Multiple curve display modes: stress-strain, force displacement, force time, strength time, and other curve modes.

6.Application of data: Utilize database management tests and standards to enable authors to use pre built data or build their own.

7.Test mode: including tensile testing Bending resistance Stress resistance Anti bending Adhesive Tearing be stripped. Elongation rate and other settings.

8.Control mode: Positioning movement Fixed speed Constant strain rate Fixed load Fixed load rate and stress rate Stress rate, etc.

9.Convenient and practical zeroing function: force, extension, and displacement can be manually zeroed by pressing one key, and the system also has the function of automatically zeroing at the beginning of the test

10.Dynamic display: During the testing process, the load, elongation, displacement, and selected test curve are dynamically displayed in real-time on the main control screen as the test progresses.

11.Peak holding: Throughout the entire testing process, the maximum value of the test item is always displayed on the screen window following the progress of the experiment.

12.Manual point picking function: It has a special manual point picking function during the testing process.

13.Automatic discrimination: After the sample is damaged, the system automatically recognizes and switches to the next function according to the expected testing requirements.

14.Automatic storage: Test conditions, test results, and gauge positions are automatically stored.

15.Automatic regression: It has the function of automatically returning the intermediate board to the starting point of the test after the test is completed.

16.Graphic analysis: After the experiment is completed, the data can be viewed with a mouse on the test curve. Any point on the test curve can be zoomed in locally for analysis, and printing can be selected.

17.Curve comparison: The curves of the same group of samples can be overlaid for comparison.

18.Report output: Graphics and parameters are open for customers to modify as needed It can be output to WORD report format, which is convenient, easy to learn, practical, and widely circulated in different locations.

19.Range extension function: It can be equipped with sensors, extensometers, and fixtures of different capacity specifications to expand the measurement range and achieve higher test accuracy

20.HY-025Automatic fault detection: When the servo system malfunctions, it can automatically diagnose the cause of the fault and automatically store the code of the fault in the servo drive, so as to quickly find and eliminate the fault