20000L stainless steel reactor

(1) Motor: Explosion proof level four motor, 22KW, brand selected from mid to high grades such as Wannan, Nanyang, Dazhong, etc; spiral

Cone reducer: 85 revolutions per minute, with brands such as Taixing and Tailong selected for mid to high grades; Blender: 304 not availableStainless steel with three layers, the bottom layer is wheel shaped and the top two layers are paddle shaped. The total length of the paddle blades is 1.5 meters, and the mostThe distance between the bottom blade and the bottom of the kettle is 300mm;

（2）

stainless steel

The wall thickness of the reaction vessel is specified as 12mm; Specification of inner and outer coils: The diameter of the outer half tube is φ 108, with a center to center distance200mm; The diameter of the inner coil is φ 76, with a center distance of 300mm. Both the inner and outer coils are made of 304 stainless steelStainless steel material; Please specify the total weight of stainless steel for the reactor in the quotation; Coils shall not use short pipes

The splicing method welding affects the appearance quality, and the entire pipeline should be continuously welded;(3) The stainless steel reaction kettle adopts a leg type, with the discharge port at a height of 1200mm above the ground. The legs are made of carbon steel material to ensure firmness and safety, and the manhole feeding port is a horizontal interface;(4) All flange interfaces on the kettle cover (except for the thermometer port) should be fully welded with 304 of the same specification and length of 20cm

Stainless steel pipes should be inserted into the kettle, and the feeding points of each flange interface should avoid the inner coil pipe. If it is impossible to avoid itFree to connect 45 ° stainless steel elbow; The length of the thermometer sleeve should ensure that it can extend to the middle and lower parts inside the reaction vessel2/3 locations;