The 18650 cylindrical battery automatic laser peeling machine produced by Xinhuapeng in recent years is developed and produced to meet the needs of market development based on practical industrial application experience. The product has stable performance, high work efficiency, and easy maintenance. Since its launch, it has attracted the attention and introduction of a large number of users. Welcome users to visit and negotiate with the manufacturer.
Introduction to the working principle of Xinhua Peng 18650 cylindrical battery automatic laser peeling machine:
The applicable products are: 18650 battery cells, 26650, cylindrical mobile power batteries, automotive power batteries, etc.
This device is mainly a laser automatic peeling and loading/unloading equipment for new energy power batteries. The device mainly uses laser to peel cylindrical battery cells.
The workflow is as follows:
1. The battery cells are manually placed into the feeding conveyor belt, and the mechanical arm grabs the battery cells and enters the peeling section conveyor belt. The selection of which conveyor belt to put them into is based on the production speed, and the battery cells enter the peeling fixture through the conveyor belt.
2. When the battery enters the laser buckle for cutting and rotation, the clamping structure of the battery cell clamps the battery cell, and the laser cuts the skin of the battery cell. After that, the waste material clamping mechanical arm picks up the peeled green paper, which is what we call waste material.
3. The peeled battery cells are automatically sent out from the discharge conveyor belt and manually collected and boxed.
working principle:
The principle of laser peeling is that the battery cell is stationary and transmitted to the laser peeling port by a stepper motor. It is cut into laser state and rotates at high speed to cut the outer skin of the battery cell. The cutting accuracy is 0.1mm. The equipment has a three channel production capacity of about 5000-8000 per hour. Therefore, this peeling structure and speed can basically meet the needs of most customers in the current market. The loading and unloading of the front and rear ends of the equipment can be added with automatic functions, which can be adjusted according to cost, whether it is manual or automatic.

Xinhua Peng 18650 cylindrical battery automatic laser peeling machine features:
1. The laser power is high, and the laser can be selected from 10W, 30W, 50W, 100W, etc. Power is controlled by software and continuously adjustable;
2. Low processing cost, no consumables required. The marking range is large. Clear marking, not easily worn, high marking and cutting efficiency;
3. The depth of carving is easy to control;
Technical advantages of Xinhuapeng laser peeling machine equipment:
1. Using a fully enclosed RF laser with a long lifespan (20000-30000 hours) and stable beam;
2. Good beam quality, stable light output, low failure rate. CO2 series models can also be used in conjunction with production lines and automated production line equipment;
3. The software has powerful functions and is compatible with files from software such as Coreldraw, AutoCAD, Photoshop, etc; Supports PLT, PCX, DXF, BMP, etc., and can directly use SHX, TTF font libraries;
4. Support automatic encoding, printing of serial numbers, batch numbers, dates, barcodes, QR codes, automatic skip numbers, etc;
Main technical parameters (non-standard customization, subject to actual needs):
Overall dimensions of the machine: 1350 * 1220 * 1700MM (L * W * H);
Input voltage: AC-220V 50Hz or AC-380V 50Hz optional;
Maximum power of the whole machine: 0.9K W (at 220V);
Input gas source pressure: 0.4-0.6 Mpa;
Gas consumption: 1.5 L/min ；
Production efficiency (C/T): ≤ 1.0 S per unit;
Equipment utilization rate: ≥ 95%; Processing method: automatic detection, automatic peeling, automatic discharge;
Material replacement method: manual feeding;