Technical description
The standard device is equipped with two standard conductivity input disks, K1 and K2, and a KT analog temperature regulator. When using one of the K1 and K2 dials, the other dial should be set to zero (with a single resistor connected). The standard conductivity input disk and analog temperature regulator can be used simultaneously.
TECHNICAL INDEX
Quantity limit
Conductivity: 0.02 μ S to 2.5 × 104 μ S; Temperature: about 10-50 ℃
Accuracy: 0.05% (1 μ S~2.5 × 104 μ S);
0.1% (0.02 μ S~1 μ S).
Note: This accuracy is relative to the factory value, and the conductivity value of the instrument is based on the factory calibration certificate.